New Joint European Service Centre with Electronics & Innovation
3 August 2016
We are pleased to announce a new relationship with US based Electronics & Innovation, who design and manufacture RF power amplifiers.
Latest news
Precision Acoustics Short-Listed for Innovative Award
26 July 2016
We are pleased to announced that we have been short-listed for a prestigious Collaborate to Innovate award, having been recognised for our prototype of a new potentially life-saving breast screening technique.
Precision Acoustics at the IEEE Symposium
29 June 2016
In September, we are pleased to be attending the annual 2016 IEEE International Ultrasonics Symposium, taking place in Tours, France.
Gary’s End-To-End Cycling Challenge For Local Cancer Centre
22 June 2016
MD Gary Livingstone is currently training hard for one of the most gruelling of physical challenges to help raise money for an important new local cancer centre in Basingstoke.
Software Development Role Available
7 June 2016
Working alongside Bournemouth University, we are searching for an ambitious and driven individual for a Software Development role, specialising in the structure and implementation of an
Traceability ensured at Precision Acoustics
2 June 2016
We have just launched a laser engraving device which allows all products manufactured by Precision Acoustics to be engraved with an indelible serial number.
Precision Acoustics – 25 Years Young
18 March 2016
Did you know, we have now been at the forefront in the design, development and manufacture of ultrasonic measuring equipment for over 25 years?
Exceptional results calibrating hydrophone at sonar frequencies
29 January 2016
We recently calibrated some 1mm needle hydrophones at well below the normal working frequency range.
IEEE International Ultrasonic Symyposium
17 October 2015
The team are finalising their preparations for the IEEE International Ultrasonic Symposium in Taipei next week.
Tamsin at NPL – Science Apprenticeship
23 September 2015
Tamsin joins this year’s intake of apprentices at NPL on an Advanced Apprenticeship Programme
2 & 4mm diameter probes introduced to our needle hydrophone range
10 September 2015
We’ve expanded our pressure measurement range with new 2 mm and 4 mm diameter needle hydrophones.
New Ultrasound Sensors for Improved Breast Cancer Screening
14 August 2015
The first prototype ultrasound sensors for a new improved breast screening technique have been manufactured by Precision Acoustics.
Paul Morris Speaks at Prestigious LabVIEW Event
11 August 2018
Dr. Paul Morris, our Principal Development Engineer, was recently invited to the National Instruments Future Faster Event in Austin, Texas
Helping Brains in Kenya
29 April 2018
Having recently replaced some of our IT equipment, we decided to send the old equipment to The Brains Institute in Kenya to maximise its legacy.
Princely Award for Adam Pounder
15 December 2017
Production Manager Adam Pounder has been awarded the prestigious Prince 2 certificate in Project Management this month.
Precision Acoustics at Le Studium
30 November 2017
Represented by Dr Andrew Hurrell and Jess Dendura, we recently attended a conference at Le Studium, Loire Valley Institute for Advanced Studies and Inserm Research in Orléans, France.
Customised ultrasonic measurement products
5 October 2017
As specialists in the design, development & manufacture of ultrasonic measuring equipment devices, our offering goes far beyond a catalogue of standard products.
Young Designer of the Year Nominee
20 September 2017
The prestigious British Engineering Excellence Awards has announced that Tom Kelley has been shortlisted in the Young Designer of the Year awards.
Exhibiting at the 2017 IEEE International Ultrasonics Symposium
9 August 2017
We are pleased to announce that we will be exhibiting at the International Ultrasonics Symposium in Washington DC – September 6th – 9th 2017.
Innovative New Breast Screening Unit
6 July 2017
A pain-free breast cancer scan, where patients swap mammograms for X-rays in warm water, is a ground-breaking project being produced at Precision Acoustics.
Steaming Ahead With New Fume Unit!
24 May 2017
We have recently invested in safety equipment with the purchase of a new fume extraction unit in the factory.
New Radiation Force Balance Unit from Precision Acoustics
28 April 2017
Can be used for the measurement of medical diagnostic and physiotherapy equipment in the frequency range 1MHz to 10MHz and the power range 10mW to 100W+.
Categories
Recent Articles
Steaming Ahead With New Fume Unit!
24 May 2017
Student kit of Piezo Ceramics
3 October 2013
Tamsin at NPL – Science Apprenticeship
23 September 2015
Testing of sensors for high radiation environments
3 December 2018
The Thomas Hardye School visit
11 July 2022
Thomas Hardye School Careers Fair
4 March 2024
Traceability ensured at Precision Acoustics
2 June 2016
Transducer Optimisation
10 November 2016
UMSR 2 Launched
13 August 2025
Volunteer day: Chesil Beach Clean
3 October 2023
We’re 1 month out from GDevCon!
12 August 2024
We’re attending Dorset STEM Careers Fair
28 April 2022
Contact us
If you would like more information, please get in touch by phone, email or enquiry form.
Alternatively complete our enquiry form below.
Telephone:
Email: