Skip to content
Tel: +44 (0) 1305 264669
Precision Acoustics

APLex F30

APLex F30 syntactic foam is a glass sphere syntactic foam using a high-performance epoxy resin as the polymeric binder.

If you have any specific questions about this product, please contact us.

aplex f30 with sample


We have a range of materials to provide uplift and buoyancy to ROV’s operating in an underwater environment.

The syntactic foams can be supplied in sheet form, moulded products or as a 2 part “liquid” kit for casting. This gives the end user the option of casting detailed shapes without subsequent and costly machining.

The cured products are hard, tough, have low specific gravity and exhibit a high hydrostatic compressive strength and excellent chemical resistance. The material is non conducting and is therefore suited to encapsulating electronics which are to be used at depth.

We hold in stock four grades of syntactic foam which is available as a 2 part mix to give the best performance/cost ratio. The material is normally supplied in 1 kg kits but larger quantities and different buoyancy / uplift properties are available on request.

For material in sheet form or as a pre-moulded shape; please contact us with required dimensions and we will supply a quotation.


Property F30
Density (kg/m3) 650 ± 20
Shore D hardness 70 ± 3
Specific gravity 0.65 ± 0.02
Longitudinal wave speed (m/s)(1 MHz to 10 MHz) 2173 ± 30
Acoustic impedance (MRayls) 1.41
Tensile strength (MPa) 28.0 ± 2
Tensile modulus (GPa) 1.7 ± 0.05
Poisson Ratio 0.375 ± 0.05
Hydrostatic crush strength (MPa) 45
Equivalent ocean failure (meters) 4500
Appearance Green
Mix ratio by weight (A:B) 2.13:1

* Precision Acoustics reserves the right to change the specification without notice.

** Minimum order quantities apply if there is no stock or if longer expiry dates are required.


This product is subject to Dangerous Goods Movement control.

Please note this will typically incur an additional £270.00 surcharge for shipments