HP 0.5mm Interchangeable Probe - Order Code HPM05/3
All dimensions in mm. All probes are hand made and as such there is always some variation between individual devices. Please contact us if the actual dimensions are critical to your work.
Description
Hydrophones of 0.5mm have been widely used in the measurement of high frequency ultrasound. With the exceptional signal-to-noise ratios obtainable from the HP series of probes, Precision Acoustics would recommend the use of this device for measurements where signal amplitudes are expected to be particularly low.
Specification
| Output Impedance: | 18pF+/- 3pF |
| Typical Probe Sensitivity: | 300nV/Pa at 3MHz (equivalent to -250.5dB re 1V/uPa) when measured at the output of a correctly terminated HP1 Submersible Preamplifier |
| Sensitivity Tolerance: | Sensitivity variation between individual probes is approximately +/-3dB |
| Typical Frequency Response: | Flat (+/-2dB): 3 to 15MHz Flat (+/-4dB): 1 to 15MHz |
| Sensor Material: | 9 micron thick gold electroded Polyvinylidene fluoride (PVdF) film |
| Sensor Dimension: | 0.5mm diameter disc |
This specification is subject to change without notice.
For further details contact one of our Applications Engineers on 01305 264669.
