Aptbond B1M Primer

Aptbond B1M is a flammable, solvent-based, moisture-cured, polymeric priming agent for use with cast polyurethane elastomers at low processing temperatures.

Category: .

Product Description

The chemistry and formulating detail produce excellent affinity to a wide range of metallic, ceramic and polymeric substrates.

Method Of Use

  • Use only in well ventilated areas.
  • The key to the success of any bonding procedure is the care taken over substrate preparation.
  • Degrease the substrate with acetone or other suitable solvent.
  • Roughen the surface by abrasion or grit blasting.
  • Finally, wipe again with clean solvent to remove any loose debris or dust from the surface after abrasion.
  • The primer is best applied by brushing. One thin coat is usually sufficient.
  • If required, the primer may be diluted up to 50% by volume using M.E.K. or Toluene.
  • After application, the primer should be left to dry for a minimum of one hour, but no longer than eight hours before over-casting with polyurethane.
  • Full bond potential will be developed after a period of seven days.It is strongly recommended that customers conduct their own preliminary trials to assess performance and suitability of the product.

Storage

Store between 15°C and 25°C in tightly lidded containers. Avoid prolonged exposure to air when not in use.

All information is based on results gained from experience and tests, and is believed to be accurate but is given without acceptance of liability for loss or damage attributable to reliance thereon as conditions of use lie outside the control of Precision Acoustics.

IMPORTANT

This product is subject to Dangerous Goods Movement control.

Please note this will typically incur an additional £250.00 surcharge for shipments outside the UK.

Contact Us

If you would like more information about this product please get in touch by phone, email or enquiry form.

Telephone:
+44 (0) 1305 264669

Enquiry Form

* indicates required field