| Description | Order Code | Price Euro |
| Fibre-optic hydrophone control system Fibre-optic hydrophone control system complete with 1 tapered and 1 plain fibre with fibre holder and visible light fault finder | FOH/1 | 15200 |
| Replacement 2m tapered fibre sensor | TFS | 390 |
| Fusion spliced customised longer tapered tip fibre hydrophone sensor. (complete with indicative calibration) | TFS(x) | 470 |
| Replacement 2m plain fibre sensor | PFS | 195 |
| Fusion spliced customised longer plain tip fibre hydrophone sensor. (complete with indicative calibration) | PFS(x) | 240 |
| Membranes | ||
| 16 micron uncoated coplanar membrane with 0.4mm active area complete with integral preamplifier and DC Coupler. Calibration over the range 1-20MHz in 1MHz increments included. Additional charges for other ranges | UCM1604/1 | 9700 |
| 16 micron uncoated coplanar membrane hydrophone with 0.2mm active area complete with integral preamplifier and DC Coupler. Calibration over the range 1-30MHz in 1MHz increments included. Additional charges for other ranges | UC1602/1 | 10000 |
| 12 micron uncoated coplanar membrane hydrophone with 0.2mm active area complete with integral preamplifier and DC Coupler. Calibration over the range 1-40MHz in 1MHz increments included. Additional charges for other ranges | UCM1202/1 | 10400 |
| 9 micron uncoated coplanar membrane hydrophone, with 0.2mm active area. Calibration over the range 1-40MHz in 1MHz increments included. Additional charges for other ranges | UCM0902 | 11000 |
| Signal Amplifier matched to hydrophone performance and calibrated with the hydrophone (on one gain setting.). The price does not include the original membrane calibration | MA/2 | 3530 |
| Hydrophone mount to facilitate accurate alignment of membrane hydrophones. The mount enables rotation of the membrane hydrophone to optimise alignment to the acoustic signal. | HMM | 2250 |
| Piston hydrophones | ||
| Circular Piston hydrophone for 100kHz to 1MHz measurements | ML4X50 | 2400 |
| Needle Hydrophones | ||
| Items always required | ||
| Submersible pre amplifier | HP1 | 1785 |
| DC coupler complete with Power Supply | DC2 | 310 |
| Interchangeable probes | ||
| 1.00mm 28um PVdF needle hydrophone probe | HPM1/1 | 2095 |
| 0.5mm 9um PVdF needle hydrophone probe | HPM05/3 | 2240 |
| 0.2mm 9um PVdF needle hydrophone probe | HPM02/1 | 2560 |
| 0.075mm 9um PVdF needle hydrophone probe | HPM075/1 | 3225 |
| 0.04mm 9um PVdF needle hydrophone probe | HPM04/01 | 3610 |
| Set of four needle hydrophones,(chosen from 1mm, 0.5mm, 0.2mm 0.075mm, 0.04mm ) complete with pre amplifier & D C Coupler and Precision Acoustics calibration certificate for all devices. (maximum of 2 of any size) | 4SET | 11850 |
| L shaped needle hydrophone mount | HNL | 135 |
| Options | ||
| 20dB in line attenuator | A20/1 | 285 |
| Hydrophone Booster Amplifier | HA2 | 3155 |
| Refurbishment of needle hydrophones | ||
| Refurbishment of needle hydrophone size 1.0mm, 0.5mm.0.2mm: complete with PA in house calibration 1-20MHz in 1MHz increments | RNL | 1235 |
| Refurbishment of needle hydrophone size 0.075mm or 0.04mm: complete with PA in house calibration 1-20MHz in 1MHz increments | RNS | 1655 |
| Repair and recalibration of Booster Amplifier | RBA | 970 |
| Positioning | ||
| Hydrophone mount to facilitate accurate alignment of needle and membrane hydrophones. The mount enables rotation of the tip of a needle hydrophone to optimise alignment to the acoustic signal. | HMN | 3145 |
| 3D positioning System complete with UMS scanning system, Electrical control module, Hydrophone & Transducer mounts, LeCroy WaveRunner 2 Channel Oscilloscope, UMS software. | TTank | POA |
Payment can be made by Amex, Visa or Mastercard
Please contact us with card details (Payment cannot be made online).
